How to Reset Low Washer Fluid Light Infiniti Q50: A Step-by-Step Guide

Last Updated on October 23, 2023 by Albert Duke

To reset the low washer fluid light in an Infiniti Q50, turn off the car and disconnect the negative battery cable for a few minutes, then reconnect it.

Credit: www.bobjohnsonimports.com

Understanding The Low Washer Fluid Light

To reset the low washer fluid light on the Infiniti Q50, simply turn on the ignition and quickly push the gas pedal downward five times. This will reset the light and solve the issue.

The low washer fluid light is a feature present in many car models, including the Infiniti Q50. It is designed to alert the driver when the windshield washer fluid level is low. This warning light is important because low washer fluid can affect visibility and compromise safety on the road.

Understanding why this light comes on, even when the fluid is full, is crucial in order to effectively address the issue.

What Is The Purpose Of The Low Washer Fluid Light?

The purpose of the low washer fluid light is to notify the driver when the level of washer fluid in the reservoir is low. This warning light serves as a reminder to refill the fluid to ensure proper functioning of the windshield wipers and uninterrupted visibility while driving.

By regularly monitoring the washer fluid level and responding promptly to the low washer fluid light, drivers can maintain optimal safety on the road.

Why Does The Low Washer Fluid Light Come On Even When The Fluid Is Full?

The low washer fluid light can come on even when the fluid is full due to several reasons. Here are some common causes:

• Sensor malfunction: The low washer fluid light is triggered by a sensor in the washer fluid reservoir. If this sensor malfunctions, it may inaccurately detect low fluid levels and illuminate the warning light.
• Contamination or blockage: The sensor may become contaminated or clogged with debris over time. This can interfere with its ability to accurately measure the fluid level, leading to false warnings.
• Electrical issue: A problem with the electrical circuit responsible for the low washer fluid light can also cause it to illuminate, even when the fluid is at the appropriate level.
• Other fluid-related issues: In some cases, the low washer fluid light may be triggered by factors other than low fluid levels, such as a clogged or malfunctioning washer pump or a leak in the washer fluid system.

It is important to troubleshoot and address the underlying cause of the false indication. This may involve cleaning the sensor, checking the electrical connections, or seeking professional assistance if needed. By resolving the issue, drivers can ensure that the low washer fluid light functions accurately and responds only when the fluid level is genuinely low.

Checking The Washer Fluid Level

To reset the low washer fluid light on your Infiniti Q50, start by checking the washer fluid level. Ensure that the reservoir is completely full to resolve the warning message.

To ensure optimal visibility while driving, it is important to regularly check the washer fluid level in your Infiniti Q50. Follow the steps below to easily inspect the level of washer fluid in your vehicle:

Step 1: Park The Car On A Flat Surface

• Find a level surface to park your Infiniti Q50 on. This will prevent any accidental spills or inaccurate readings when checking the washer fluid level.

Step 2: Locate The Washer Fluid Reservoir

• Next, locate the washer fluid reservoir in your Infiniti Q50. It is usually a translucent plastic container with a cap, typically located near the engine.

Step 3: Open The Washer Fluid Reservoir Cap

• Carefully open the cap of the washer fluid reservoir to access the fluid inside. Take caution not to spill any of the fluid while doing so.

Step 4: Check The Fluid Level Visually

• Once the cap is open, visually inspect the fluid level in the reservoir. Ensure that the fluid is above the minimum level mark and below the maximum level mark. If the fluid is below the minimum level mark, it is advisable to add washer fluid to avoid running out while on the road.

Remember to secure the cap tightly after checking the fluid level to prevent any leakage.

Regularly checking the washer fluid level is a simple maintenance task that ensures your windshield stays clean and clear. By following these steps, you can easily stay on top of your Infiniti Q50’s washer fluid level and maintain optimal visibility while driving.

Resetting The Low Washer Fluid Light

To reset the low washer fluid light on an Infiniti Q50, you can disconnect the sensor by removing the front passenger wheel and fender liner. Locate the connector near the top of the reservoir next to the filler neck and disconnect it to deactivate the washer pump and level switch.

When your Infiniti Q50’s low washer fluid light comes on, it’s important to reset it after refilling the washer fluid to ensure accurate warnings in the future. Follow these steps to reset the low washer fluid light:

Step 1: Get Inside The Car And Close All Doors

Start by getting inside your Infiniti Q50 and making sure all the doors are closed. This will ensure that the reset process can be completed smoothly.

Step 2: Insert The Key Into The Ignition

Insert the key into the ignition slot of your Infiniti Q50. Make sure it is fully inserted and secure.

Step 3: Turn The Key To The “On” Position

Turn the key to the “ON” position without starting the engine. This will activate the car’s electrical system.

Step 4: Locate The Trip Reset Button On The Control Panel

Look for the trip reset button on the control panel of your Infiniti Q50. It is usually located near the speedometer or the odometer.

Step 5: Press And Hold The Trip Reset Button

Press and hold the trip reset button on your Infiniti Q50’s control panel. Hold it down for a few seconds until you see the low washer fluid light start flashing or go off.

Step 6: Release The Trip Reset Button When The Light Flashes Or Goes Off

Release the trip reset button on your Infiniti Q50’s control panel once the low washer fluid light either flashes or goes off. This indicates that the reset process is complete.

By following these simple steps, you can easily reset the low washer fluid light on your Infiniti Q50 and ensure that it accurately reflects the level of washer fluid in your vehicle. Remember to always refill the washer fluid when necessary to maintain optimal visibility on the road.

Troubleshooting Common Issues

To reset the low washer fluid light on an Infiniti Q50, simply disconnect the sensor by removing the front passenger wheel and fender liner. There is a connector near the top of the reservoir that can be disconnected to disable the sensor.

Issue 1: The Low Washer Fluid Light Is Still On After Resetting:

• The reset procedure may not have been performed correctly. Try following these steps again to ensure the reset is successful.
• There might be an issue with the sensor or wiring. Inspect the sensor and wiring for any damage or loose connections.
• The sensor could be malfunctioning. Consider replacing the sensor if all other troubleshooting steps have been unsuccessful.
• It’s possible that there is a problem with the washer fluid level itself. Check the fluid level to ensure it is actually full. If not, refill the washer fluid reservoir.

Issue 2: The Low Washer Fluid Light Keeps Coming Back On:

• Check for any leaks in the washer fluid system. Leaks can cause the fluid level to drop, triggering the low washer fluid light to come on. Repair any leaks that are found.
• The sensor could be faulty or incorrectly calibrated. Replace the sensor or have it calibrated properly.
• Inspect the wiring and connections for any issues. Loose or damaged wiring can cause intermittent signals to the sensor, resulting in the light coming on unexpectedly.
• Reset the light again and observe if it comes back on. If it does, there may be an underlying issue that requires further inspection and diagnosis by a professional.

Issue 3: The Low Washer Fluid Light Is Not Turning Off Even When The Fluid Is Full:

• Ensure that the washer fluid reservoir is completely filled. If the fluid level is below the minimum mark, the light may remain on even though there is fluid in the tank.
• Check the sensor for any blockages or debris. Clean the sensor and ensure it is free from any obstructions that could prevent it from accurately detecting the fluid level.
• The sensor itself may be faulty and not accurately detecting the fluid level. Consider replacing the sensor if cleaning does not resolve the issue.
• Perform a reset of the low washer fluid light following the correct procedure for your Infiniti Q50 model.

Remember, always consult the vehicle’s manual or seek professional help if you encounter any difficulties or if the issues persist.

Final Thoughts

To reset the low washer fluid light on your Infiniti Q50, you can quickly reset it by turning the ignition on and pushing the gas pedal downward five times within three seconds. This will reset the warning light, ensuring that it turns off.

Summary Of The Steps To Reset The Low Washer Fluid Light:

• Turn on the Infiniti Q50.
• Locate the settings menu using the control buttons on the dashboard.
• Access the Maintenance menu in the settings.
• Scroll through the options until you find the Low Washer Fluid Light option.
• Select the Low Washer Fluid Light option and choose the reset option.
• Confirm the reset action.

Importance Of Maintaining The Proper Level Of Washer Fluid:

• Ensures clear visibility: Adequate washer fluid helps in cleaning the windshield, ensuring clear visibility while driving.
• Prevents damage: Without enough fluid, the wipers may cause scratches on the windshield, leading to expensive repairs.
• Enhances safety: Clear windshields are crucial for safe driving, allowing you to react quickly to any road hazards.
• Improves cleaning performance: Proper levels of washer fluid enable the wipers to effectively clean the windshield, removing dirt and debris.

Tips For Preventing The Low Washer Fluid Light From Coming On Frequently:

• Regularly check the fluid level: Make it a habit to check the washer fluid level every few weeks or before long trips.
• Use proper fluid: Use a high-quality washer fluid recommended for your Infiniti Q50 to ensure optimal cleaning performance.
• Keep a spare bottle in the car: It’s always a good idea to keep an extra bottle of washer fluid in your car for emergencies.
• Clean the nozzles and wiper blades: Periodically clean the nozzles and wiper blades to remove any clogs or dirt buildup that may affect the fluid’s flow.
• Winter-specific fluid: In colder climates, consider using a winter-specific fluid that won’t freeze in low temperatures.

Remember, keeping your washer fluid at the proper level is not only essential for maintaining a clean windshield but also for ensuring your safety on the road. By following these simple tips and regularly checking your washer fluid level, you can avoid the hassle of dealing with frequent low washer fluid warnings.

Frequently Asked Questions For How To Reset Low Washer Fluid Light Infiniti Q50

Why Is My Low Washer Fluid Light On When It’S Full?

The low washer fluid light may be on when it’s full due to a contaminated sensor or blocked contacts. Try cleaning the tank and sensor, and if the issue persists, consider replacing the sensor. Disconnecting the sensor can also turn off the light.

How Do You Reset The Warning Light On An Infiniti Q50?

To reset the warning light on an Infiniti Q50, follow these steps: 1. Start the car and go to the Settings menu. 2. Find the Maintenance section and select Reset. 3. Choose the warning light you want to reset, like the washer fluid light.

4. Confirm the reset and turn off the car. 5. Turn the car back on, and the warning light should be reset.

Why Wont My Washer Fluid Light Go Off?

The washer fluid light may not go off if the sensor is contaminated or blocked. Clean the tank and sensor, or replace the sensor if needed.

How Do I Turn Off The Washer Fluid Light?

To turn off the washer fluid light, you can disconnect the sensor by removing the front passenger wheel and fender liner. Disconnect the connector near the top of the reservoir, next to the filler neck. This will disconnect both the washer pump and the washer level switch.

Conclusion

To sum up, resetting the low washer fluid light on your Infiniti Q50 is a simple process that can be done by checking the washer fluid level and turning off the car. If the light persists after refilling the fluid, cleaning the washer tank and sensor may be necessary.

Disconnecting the sensor can also be a solution, but it requires removing the front passenger wheel and fender liner. Remember to reconnect both the washer pump and the washer level switch after disconnecting the sensor. If all else fails, a quick reset of the system by unhooking the negative terminal on the battery may resolve the issue.

By following these steps, you can successfully reset the low washer fluid light on your Infiniti Q50 and ensure the safety and functionality of your vehicle.