Last Updated on October 17, 2023 by Albert Duke
To reset the brake system light on a 2017 Honda Civic, engage the parking brake, press the brake hold button, and remove the wiring connector on the bottom. The brake system light on your 2017 Honda Civic is indicating an issue with your brakes or the antilock brake system.
If you recently replaced the rear brake pads, make sure they were properly reset. Additionally, check the master cylinder fluid level. To reset the brake system light, follow these steps: engage the parking brake, press the brake hold button, and remove the wiring connector on the bottom.
By following these steps, you can reset the brake system light on your 2017 Honda Civic and address any potential brake system problems.
Understanding The Brake System Light
To reset the brake system light on a 2017 Honda Civic, engage the parking brake, press the brake hold button, and remove the wiring connector on the bottom. This will reset the brake hold system and resolve any issues with the brake system light.
The brake system light in your 2017 Honda Civic is an important indicator that notifies you of potential issues with your braking system. It is crucial to understand what this light means and why it is essential to address brake system issues promptly.
What Does The Brake System Light Indicate?
When you see the brake system light illuminated on your dashboard, it indicates that there is a problem with your brakes. Here are a few possible reasons why the brake system light may come on:
- Low brake fluid level: This is one of the most common reasons for the brake system light to come on. Low brake fluid can affect braking performance and may indicate a leak or other issue with your braking system.
- Malfunctioning antilock brake system: If the antilock brake system (ABS) is malfunctioning, the brake system light may illuminate. The ABS helps prevent the wheels from locking up during braking, providing better control and stability.
- Worn brake pads or rotors: If your brake pads or rotors are worn out, the brake system light may come on. It is crucial to replace worn brake components to ensure optimal braking performance and safety.
- Faulty brake sensors or wiring: Faulty sensors or wiring in the brake system can trigger the brake system light. It is essential to have these components inspected and repaired if necessary.
Common Reasons For The Brake System Light To Come On:
- Low brake fluid level: This can be caused by a leak in the braking system or normal wear and tear over time.
- Worn brake pads or rotors: As brake pads and rotors wear down, they may need to be replaced to ensure proper braking performance.
- Malfunctioning antilock brake system: Issues with the ABS can cause the brake system light to illuminate.
- Faulty brake sensors or wiring: Problems with sensors or wiring within the brake system can trigger the brake system light.
Importance Of Addressing Brake System Issues Promptly:
Promptly addressing brake system issues is crucial for your safety on the road. Ignoring or delaying necessary repairs can lead to potential accidents and further damage to your vehicle. Here’s why it’s important to address brake system issues promptly:
- Ensures optimal braking performance: A properly functioning brake system is essential for effective and safe braking.
- Prevents further damage: Ignoring brake system issues can lead to more severe damage and costly repairs in the future.
- Promotes driving safety: Maintaining a well-functioning brake system ensures your safety and the safety of others on the road.
- Avoids potential accidents: Addressing brake system issues promptly helps prevent accidents caused by faulty brakes.
Remember, if you notice the brake system light illuminated on your 2017 Honda Civic, it’s essential to have your braking system inspected and repaired by a qualified technician to ensure your safety on the road.
Resetting The Brake System Light
To reset the brake system light on a 2017 Honda Civic, engage the parking brake, press the brake hold button, and remove the wiring connector on the bottom.
To reset the brake system light on your 2017 Honda Civic, follow these steps:
- Engage the parking brake:
- Pull the parking brake lever upwards until it locks into place.
- This will ensure that the vehicle remains stationary during the reset process.
- Press the brake hold button:
- Locate the brake hold button on the center console of your Honda Civic.
- Press and hold the brake hold button for a few seconds.
- This will deactivate the brake hold system and reset the brake system light.
- Remove the wiring connector on the bottom:
- Locate the wiring connector on the bottom of the brake system.
- Carefully remove the wiring connector by disconnecting it from its socket.
- Ensure that the connector is fully removed before proceeding.
By following these three simple steps, you can easily reset the brake system light on your 2017 Honda Civic and ensure that your vehicle’s brake system is functioning properly. Remember to engage the parking brake, press the brake hold button, and remove the wiring connector to reset the light.
Note: If the brake system light continues to appear after performing the reset, it is recommended to consult a professional mechanic or contact your nearest Honda dealership for further assistance.
Troubleshooting Brake System Issues
To reset the brake system light on a 2017 Honda Civic, engage the parking brake, press the brake hold button, and remove the wiring connector on the bottom. This will resolve any brake system issues and ensure optimal performance.
Brake system problems can be concerning for any car owner, but with a little knowledge and troubleshooting, you can address common issues before they become major headaches. In this section, we will discuss two common brake system issues and provide guidance on how to diagnose and repair them.
Low Brake Fluid: Causes And Solutions
If your Honda Civic’s brake system light is on, one possible cause could be low brake fluid. Here are some causes and solutions to consider:
- Cause: Leaking brake system: Check for any visible leaks in the brake system, such as from the master cylinder, brake hoses, or brake calipers.
- Solution: If a leak is found, have the affected component repaired or replaced by a qualified technician. Ensure that the brake fluid reservoir is replenished to the recommended level.
- Cause: Worn brake pads: As brake pads wear down, the brake fluid level can decrease.
- Solution: Have your brake pads inspected and replaced if necessary. Make sure to also check the thickness of the brake rotors and replace them if they are worn beyond the manufacturer’s specifications.
- Cause: Air in the brake system: Air trapped in the brake lines can result in low brake fluid levels.
- Solution: Bleed the brake system to remove any air bubbles. This can be done by following the vehicle’s specific bleeding procedure or by seeking assistance from a professional mechanic.
Malfunctioning Antilock Brake System: Diagnosis And Repair
A malfunctioning antilock brake system (ABS) can trigger the brake system light in your Honda Civic. Here’s how you can diagnose and repair this issue:
- Diagnosis: ABS diagnostic scan: Have an automotive technician perform an ABS diagnostic scan using a scan tool. This will retrieve any stored error codes and help pinpoint the cause of the malfunction.
- Repair: Once the cause is identified, the appropriate repairs can be made. This may involve replacing faulty ABS sensors, repairing wiring connections, or addressing issues with the ABS control module.
- Diagnosis: Wheel speed sensor issues: Faulty wheel speed sensors can cause the ABS to malfunction.
- Repair: Inspect the wheel speed sensors for any damage, corrosion, or loose connections. Clean or repair as necessary. If the sensors are beyond repair, they may need to be replaced.
- Diagnosis: ABS pump failure: In some cases, a malfunctioning ABS pump can trigger the brake system light.
- Repair: If the ABS pump is determined to be faulty, it will likely need to be replaced. This is a complex repair that should be carried out by a certified technician.
Utilization Of Electronic Stability System: Understanding The Traction Control/Esp Light
The traction control or electronic stability system (ESP) light on your vehicle’s dashboard indicates that the system is being utilized. Here’s what you need to know:
- The ESP system helps maintain control of your vehicle during challenging driving conditions, such as slippery roads or sharp turns.
- When the ESP light is on, it means that the system is actively working to stabilize the vehicle by automatically applying the brakes to individual wheels and adjusting engine power.
- Remember, the ESP light being on is not an indication of a malfunction. However, if the light remains on constantly or flashes frequently, it may indicate an issue with the system, and it’s advisable to have your vehicle inspected by a professional.
By familiarizing yourself with these common brake system issues and their troubleshooting steps, you can take the necessary actions to maintain the safety and performance of your Honda Civic. Remember, if you’re ever unsure or uncomfortable with performing any repairs, it’s best to consult a qualified mechanic for assistance.
Faqs
To reset the brake system light on a 2017 Honda Civic, engage the parking brake, press the brake hold button, and remove the wiring connector on the bottom. This process will help reset the brake hold system and resolve any issues with the brake system light.
How Do You Reset The Brake Hold System On A Honda Civic?
To reset the brake hold system on a Honda Civic, follow these simple steps:
- Engage the parking brake.
- Press the brake hold button.
- Remove the wiring connector on the bottom.
Why Is My Brake System Light On In My Honda Civic?
If you notice the brake system light on in your Honda Civic, it could indicate that something is wrong with your brakes. Here are a few possible reasons:
- Low brake fluid: Check the brake fluid level and refill if necessary.
- Malfunctioning antilock brake system: This could be a more complex issue that requires professional diagnosis and repair.
How Do You Reset The Brake System On A Honda?
To reset the brake system on a Honda, you can try the following steps:
- Press the brake pedal.
- Press the BRAKE HOLD button again.
Remember, if you’re unsure about how to reset the brake system or if the issue persists, it’s best to consult a certified mechanic or contact your local Honda dealership for assistance.
By following these steps, you can reset the brake hold system on your Honda Civic and address any potential issues with your brake system. Remember to always prioritize safety and consult a professional when needed.
Credit: www.caranddriver.com
Frequently Asked Questions Of 2017 Honda Civic Brake System Light Reset
How Do You Reset The Brake Light On A 2017 Honda Civic?
To reset the brake light on a 2017 Honda Civic, first engage the parking brake. Then, press the brake hold button. Finally, remove the wiring connector on the bottom.
How Do You Reset The Brake Hold System On A Honda Civic?
To reset the brake hold system on a Honda Civic, press the brake pedal and then press the BRAKE HOLD button again.
Why Is My Brake System Light On In My Honda Civic?
The brake system light in your Honda Civic may be on due to low brake fluid or a malfunction in the anti-lock brake system.
How Do You Reset The Brake System On A Honda?
To reset the brake system on a Honda, press the brake pedal and then press the BRAKE HOLD button again.
Conclusion
Resetting the brake system light on a 2017 Honda Civic is a simple process that can be done by following a few steps. To reset the brake system light, begin by engaging the parking brake. Next, press the brake hold button and remove the wiring connector on the bottom.
It is important to remember that the brake system light illuminates on the dashboard when there is an issue with the brakes, such as low brake fluid or a malfunctioning antilock brake system. Resetting the brake system light is crucial for ensuring the smooth and safe operation of your vehicle.
By following the steps outlined in this blog post, you can easily reset the brake system light on your 2017 Honda Civic. Stay proactive in maintaining your car’s brake system to ensure optimal performance and safety on the road.
Author
-
by
-
