2014 Jeep Grand Cherokee Check Engine Light Reset

Last Updated on September 15, 2023 by Albert Duke

To reset the check engine light on a 2014 Jeep Grand Cherokee, follow these steps: 1) Turn off the vehicle and open the hood; 2) Locate the battery and find the negative terminal; 3) Disconnect the negative terminal for about 10 minutes; 4) Reconnect the negative terminal and start the vehicle. This should reset the check engine light.

If you own a 2014 Jeep Grand Cherokee and are wondering how to reset the check engine light, you’ve come to the right place. The check engine light can be a cause for concern, but sometimes it can be reset with a simple procedure.

In this guide, we will provide you with step-by-step instructions on how to reset the check engine light on your 2014 Jeep Grand Cherokee. By following these steps, you can potentially clear any fault codes and turn off the check engine light. So, let’s get started and learn how to reset the check engine light on your 2014 Jeep Grand Cherokee.

Reasons For Check Engine Light

There are several reasons why the check engine light may come on in your 2014 Jeep Grand Cherokee. Some common causes include a malfunction with the fuel injection system, a damaged oxygen sensor, a dirty mass airflow sensor, a faulty head gasket, a faulty emissions control part, or defective spark plugs.

It is important to address these issues promptly to prevent further damage to your vehicle and ensure optimal performance. If the check engine light comes on, it is recommended to have your vehicle inspected by a qualified mechanic to diagnose and resolve the underlying issue.

Ignoring the check engine light could lead to more serious problems down the line.

How To Reset Check Engine Light

To reset the check engine light on your 2014 Jeep Grand Cherokee, follow these steps. Firstly, ensure that your vehicle is turned off and the hood is open. Next, turn the ignition switch to the “on” position. Press and hold the “trip” button on the dashboard.

While still holding the “trip” button, turn the ignition switch back to the “off” position. Release the “trip” button and start the engine. Your check engine light should now be reset. To confirm that the check engine light has been reset, you can check if it stays off during subsequent drives.

Frequently Asked Questions

The check engine light on a 2014 Jeep Grand Cherokee will not reset itself automatically. To reset the light, you can try disconnecting the battery for a few minutes and then reconnecting it. Another method is to use an OBD-II scanner to clear the code and reset the light.

Make sure to address and fix the underlying issue that caused the light to come on in the first place. If the issue is resolved, the light will turn off on its own after a few driving cycles. It is always recommended to consult your vehicle’s manual or contact a professional for specific instructions and guidance on how to reset the check engine light properly.

Frequently Asked Questions On 2014 Jeep Grand Cherokee Check Engine Light Reset

Why Is My Engine Light On In My 2014 Jeep Cherokee?

The engine light in your 2014 Jeep Cherokee could be on due to various reasons such as a malfunction in the fuel injection system, a damaged oxygen sensor, or faulty emissions control part. Get it checked by a professional.

How Do You Reset The Check Engine Light On A 2014?

To reset the check engine light on a 2014 vehicle, follow these steps: 1. Turn off the vehicle. 2. Open the hood. 3. Locate the battery and find the negative terminal. 4. Disconnect the negative terminal for a few seconds. 5.

Reconnect the negative terminal. 6. Start the vehicle and check if the check engine light has been reset. Note: It’s important to fix any underlying issues that caused the light to turn on before resetting it.

Why Is My Check Engine Light Staying On In My Jeep Grand Cherokee?

The check engine light in your Jeep Grand Cherokee might stay on due to various reasons such as a malfunctioning fuel injection system, damaged oxygen sensor, dirty mass airflow sensor, faulty head gasket, defective spark plugs, or faulty emissions control part.

Will Jeep Check Engine Light Reset Itself?

The check engine light on a Jeep will turn off if the issue causing it is fixed.

Conclusion

To conclude, resetting the check engine light on a 2014 Jeep Grand Cherokee is a simple process that can be done at home. By following the steps outlined in this blog post, you can clear the check engine light and restore peace of mind.

It is important to note that resetting the light does not fix the underlying issue causing it to illuminate. If the check engine light continues to come on after being reset, it is recommended to have the vehicle inspected by a qualified mechanic to determine the root cause of the problem.

Regular maintenance and addressing any issues promptly will help keep your Jeep Grand Cherokee running smoothly for years to come. So, don’t let the check engine light stress you out – take control and reset it confidently.