Mitsubishi Outlander Service Engine Soon Light Reset

Last Updated on September 20, 2023 by Albert Duke

To reset the service engine soon light on a Mitsubishi Outlander, turn off the vehicle and make sure the ignition is completely off. Locate the INFO button near the driver’s side AC vents, and once the service reminder is shown, press and hold the INFO button for approximately two seconds.

This will reset the service engine soon light. Ensure you follow the correct steps to reset the light and address any underlying issues with the engine, drivetrain, emission systems, or other components as necessary.

Understanding The Service Engine Soon Light

The service engine soon light on a Mitsubishi Outlander is a unique alert system that notifies drivers of issues detected by the onboard diagnostic system. This light indicates problems with the engine, drivetrain, emission systems, and more. It is not the same as a check engine light.

To determine the cause of the service engine soon light, there are a few common reasons to consider. These include a faulty or loose gas cap, low fluid levels or overdue scheduled maintenance, contaminated gas, malfunctioning oxygen sensor, faulty wires and spark plugs, and a faulty mass airflow sensor.

To reset the service engine soon light on a Mitsubishi Outlander, turn off the vehicle and ensure the ignition is completely off. Locate the INFO button near the AC vents and press and hold it for about two seconds when the service reminder is displayed.

Reasons For Service Engine Soon Light

The service engine soon light on a Mitsubishi Outlander is an alert that indicates potential issues with the engine, drivetrain, and emission systems. One common reason for this light to illuminate is a faulty or loose gas cap. It is a good idea to check the gas cap first if the light comes on.

Other possible causes include low fluid levels or overdue scheduled service, contaminated gas, malfunctioning oxygen sensor, faulty wires and spark plugs, and a faulty mass airflow sensor. To reset the check engine light, turn off the vehicle and ensure the ignition is completely off.

Locate the INFO button near the driver’s side AC vents and press and hold it for about two seconds when the service reminder is shown. Consider using an OBD-II scanner for a more accurate diagnosis. These steps should help reset the service engine soon light on a Mitsubishi Outlander.

How To Reset The Service Engine Soon Light On A Mitsubishi Outlander

To reset the service engine soon light on a Mitsubishi Outlander, start by turning off your vehicle and ensuring that the ignition is completely off. Next, locate the INFO button near the driver’s side AC vents. Once you see the service reminder, press and hold the INFO button for approximately two seconds.

This should reset the light. Alternatively, you can use an OBD-II scanner for a different method of resetting the light. The service engine soon light is a unique alert provided by Mitsubishi to indicate issues with the engine, drivetrain, and emissions systems.

If your service engine soon light is on, it could be due to a faulty gas cap, low fluid levels, contaminated gas, malfunctioning oxygen sensors, faulty wires and spark plugs, or a faulty mass airflow sensor. It’s important to address the underlying issue to ensure proper vehicle functionality.

Additional Resources

Mitsubishi provides a unique alert called “service engine soon” instead of a traditional check engine light. This alert is triggered when the onboard diagnostic system detects issues with the engine, drivetrain, emission systems, and more. If you’re wondering why your service engine soon light is on, there are several possible reasons.

One of the first things to check is the gas cap, as a loose or faulty cap can trigger the light. Other potential causes include low fluid levels, contaminated gas, malfunctioning oxygen sensors, faulty spark plugs, or a faulty mass airflow sensor.

To reset the check engine light on a Mitsubishi Outlander, you can follow a simple process. Turn off your vehicle completely, locate the INFO button, usually near the driver’s side AC vents, and press and hold it for about two seconds.

This should reset the service reminder on your vehicle.

Frequently Asked Questions For Mitsubishi Outlander Service Engine Soon Light Reset

What Does Service Engine Soon Light Mean On Mitsubishi Outlander?

The service engine soon light on a Mitsubishi Outlander indicates issues with the engine, drivetrain, or emission systems.

How Do You Reset The Service Engine Light On A 2016 Outlander?

To reset the service engine light on a 2016 Outlander, follow these steps: 1. Turn off the vehicle and ensure the ignition is completely off. 2. Locate the INFO button near the driver’s side AC vents. 3. Press and hold the INFO button for approximately two seconds.

4. Release the button once the service reminder is shown. 5. The service engine light should now be reset.

How Do I Find Out Why My Service Engine Soon Light Is On?

To find out why your service engine soon light is on, check these possible reasons: 1. Faulty or loose gas cap. 2. Low fluid levels/scheduled service overdue. 3. Contaminated gas. 4. Malfunctioning oxygen sensor. 5. Wires and spark plugs. 6.

Faulty mass airflow sensor. To reset the check engine light on a Mitsubishi Outlander: 1. Turn off your vehicle and ensure that the ignition is completely off. 2. Locate the INFO button, typically near the driver’s side AC vents. 3.

Once the service reminder is shown, press and hold the INFO button for approximately two seconds. You can also use an OBD-II scanner to reset the service engine soon light.

How Do You Reset The Check Engine Light On A Mitsubishi?

To reset the check engine light on a Mitsubishi Outlander: 1. Turn off your vehicle and make sure the ignition is completely off. 2. Locate the INFO button near the driver’s side AC vents. 3. Once the service reminder is displayed, press and hold the INFO button for about two seconds.

4. The check engine light should be reset.

Conclusion

If you own a Mitsubishi Outlander and you’re wondering how to reset the service engine soon light, we’ve got you covered. The service engine soon light is a unique alert system that lets you know when there are issues with your engine, drivetrain, emission systems, and more.

One of the most common reasons for the light to come on is a faulty or loose gas cap, so that’s the first thing you should check. Other possible causes include low fluid levels, contaminated gas, malfunctioning oxygen sensor, and faulty wires or spark plugs.

Fortunately, resetting the light is a simple process. All you have to do is turn off your vehicle, locate the INFO button near the driver’s side AC vents, and press and hold it for approximately two seconds when the service reminder is shown.

Following these steps will reset the light and give you peace of mind knowing that your Outlander is running smoothly.