How to Reset Esp Bas Light: Quick and Easy Guide

Last Updated on October 31, 2023 by Albert Duke

To reset the ESP BAS light, turn the steering wheel twice to the right, then twice to the left, and finally return it to the center position. This will recalibrate the steering angle sensor and turn off the ESP BAS light.

Understanding Esp Bas Light

To reset the ESP BAS light in your car, you can try recalibrating the steering angle sensor. Simply turn your steering wheel twice to the right, then twice to the left, and return it to the center position. This should complete the reset and turn off the ESP BAS light.

The ESP BAS light, also known as the Electronic Stability Program (ESP) and Brake Assist System (BAS) light, is a warning indicator that appears on your car’s dashboard. This light is designed to alert you of any issues with your vehicle’s stability and braking systems.

When the light turns on, it means that there is a problem that needs to be addressed. Ignoring the ESP BAS light can be dangerous as it could affect your vehicle’s handling and braking performance.

What Is Esp Bas Light?

• The ESP BAS light is a warning indicator that appears on your car’s dashboard.
• It stands for Electronic Stability Program (ESP) and Brake Assist System (BAS) light.
• This light alerts you of any issues with your vehicle’s stability and braking systems.
• Ignoring the ESP BAS light can be dangerous and affect your vehicle’s handling and braking performance.

Common Causes For Esp Bas Light To Turn On:

• Wiring problems that run to the anti-lock brake system.
• Damaged brake components, such as the rotors, brake pads, or calipers.
• Bad wheel speed sensor, which is used in unison with the braking and stability control systems.
• Faulty brake switch.
• Steering angle sensor malfunction.
• Issues with the vehicle’s computer system or sensors.

Importance Of Fixing Esp Bas Light Issues:

• Ensures proper functioning of your vehicle’s stability and braking systems.
• Prevents potential accidents or loss of control while driving.
• Maintains optimal vehicle performance and handling.
• Saves money in the long run by addressing the issue before it worsens.
• Avoids potential damage to other vehicle parts due to prolonged issues.
• Gives you peace of mind knowing that your vehicle is safe to drive.

Remember, if you notice the ESP BAS light turning on, it is crucial to address the issue promptly. Ignoring it can compromise your safety on the road. Consult a professional mechanic or refer to your vehicle’s manual for guidance on resetting the ESP BAS light or resolving any underlying issues.

Resetting Esp Bas Light On Do​Dge Vehicles

To reset the ESP BAS light on Dodge vehicles, you can recalibrate the steering angle sensor. Simply turn the steering wheel twice to the right, then twice to the left, and return it to the center position to complete the reset process.

This DIY repair job should turn off the ESP BAS light.

Resetting Esp Bas Light On Dodge Vehicles

If you are experiencing the Esp Bas Light on your Dodge vehicle, there are a few steps you can take to reset it. Here is a step-by-step guide on how to reset Esp Bas Light on Dodge vehicles:

Step 1: Check For Steering Angle Sensor Issue

Before proceeding with the reset procedure, it is important to check for any issues with the steering angle sensor. This sensor plays a crucial role in the functioning of the Esp Bas system. If the sensor is faulty or misaligned, it can trigger the Esp Bas Light.

Here are a few symptoms to look out for:

• Steering wheel feels off-center or not aligned properly
• Esp Bas Light comes on when making sharp turns
• Poor vehicle handling and stability

If you notice any of these symptoms, it is recommended to have the steering angle sensor checked and repaired by a professional technician.

Step 2: Performing Esp/Bas Reset Procedure

Once you have ruled out any issues with the steering angle sensor, you can proceed with the Esp/Bas reset procedure. This procedure is relatively simple and can be done without any special tools. Here are the steps:

• Start by turning off your vehicle’s engine and removing the key from the ignition.
• Disconnect the negative terminal of the battery and wait for about 10 minutes. This will allow the system to reset completely.
• Reconnect the negative terminal of the battery and start your vehicle.
• Turn the steering wheel fully to the left and then fully to the right.
• Repeat this process 3-4 times.

By performing these steps, you are essentially recalibrating the Esp Bas system. In most cases, this will reset the Esp Bas Light on your Dodge vehicle.

Step 3: Resetting Esp/Bas Light Using Diagnostic Tool

If the Esp Bas Light persists even after performing the reset procedure, it may be necessary to use a diagnostic tool to reset the system. Here are the steps:

• Connect the diagnostic tool to the OBD-II port of your vehicle. This port is usually located under the dashboard on the driver’s side.
• Follow the instructions provided by the diagnostic tool to access the Esp Bas system.
• Select the option to reset the Esp Bas system.
• Wait for the tool to complete the reset process.
• Disconnect the diagnostic tool and start your vehicle.

Using a diagnostic tool will allow for a more thorough reset of the Esp Bas system. If the light continues to illuminate after performing this step, it is recommended to seek professional assistance for further diagnosis and repair.

Step 4: Repairing Wheel Speed Sensor

If none of the above steps have resolved the issue, it is possible that a faulty wheel speed sensor is causing the Esp Bas Light to come on. The wheel speed sensor plays a crucial role in providing input to the Esp Bas system.

If the sensor is damaged or malfunctioning, it can trigger the light. Here are a few steps to diagnose and repair the wheel speed sensor:

• Lift your vehicle and secure it on jack stands.
• Locate the wheel speed sensor on the affected wheel.
• Inspect the sensor for any signs of damage or corrosion.
• If any issues are found, replace the sensor with a new one.
• Clear any error codes using a diagnostic tool or by disconnecting the battery as described in Step 2.
• Test drive your vehicle to ensure that the Esp Bas Light no longer illuminates.

Repairing or replacing a faulty wheel speed sensor should resolve the issue and reset the Esp Bas Light on your Dodge vehicle.

Remember, if you are not confident in performing any of these steps yourself, it is always recommended to seek professional assistance. Resolving any issues with the Esp Bas system will not only ensure your safety but also prevent any further damage to your vehicle.

Resetting Esp Bas Light On Jeep Vehicles

To reset the ESP BAS light on Jeep vehicles, you can try recalibrating the steering angle sensor. Simply turn the steering wheel twice to the right, then twice to the left, and return it to the center position to complete the reset.

This DIY repair job should help turn off the ESP BAS light.

If you’re experiencing the Esp Bas light on your Jeep vehicle, don’t panic. This light indicates a problem with the Electronic Stability Program (ESP) and Brake Assist System (BAS), both critical for your safety on the road. Fortunately, there are steps you can take to reset the Esp Bas light and address any underlying issues.

In this guide, we’ll walk you through the process step by step.

Step 1: Recalibrating Steering Angle Sensor

The steering angle sensor is a crucial component of the ESP/BAS system, as it helps determine the direction and angle of your vehicle’s steering. If this sensor is not calibrated correctly, it can trigger the Esp Bas light to come on.

Follow these steps to recalibrate the steering angle sensor:

• Start by turning on the ignition without starting the engine.
• Turn the steering wheel fully to the left, then fully to the right.
• Return the steering wheel to the center position.
• Turn off the ignition and wait for a few seconds.
• Turn the ignition back on and check if the Esp Bas light has been reset.

Step 2: Resetting Esp/Bas Light Using Diagnostic Tool

If the steering angle sensor calibration doesn’t resolve the issue, you can try resetting the Esp Bas light using a diagnostic tool. This tool will communicate with your vehicle’s onboard computer and clear any stored error codes. Here’s how to do it:

• Connect the diagnostic tool to the vehicle’s OBD-II port, usually located under the dashboard.
• Follow the tool’s instructions to access the ESP/BAS system.
• Select the option to clear or reset the error codes.
• Wait for the process to complete and check if the Esp Bas light has been reset.

Step 3: Inspecting Brake Components

Faulty brake components can also trigger the Esp Bas light on your Jeep. It’s essential to visually inspect your brake system to identify any potential issues. Here are some things to look out for:

• Check the brake pads for wear and tear. If they are excessively worn, they may need to be replaced.
• Inspect the brake rotors for any signs of damage or warping. If they are worn out or distorted, they may cause the Esp Bas light to illuminate.
• Examine the brake calipers for any leaks or malfunctions. Faulty calipers can affect the braking performance and trigger the Esp Bas light.

Step 4: Replacing Faulty Wheel Speed Sensor

The wheel speed sensor plays a crucial role in the operation of the ESP/BAS system. If this sensor is faulty, it can cause the Esp Bas light to come on. Consider replacing the wheel speed sensor if all other steps have been unsuccessful in resetting the light.

Consult your vehicle’s manual or seek professional assistance to ensure proper installation.

By following these steps, you can reset the Esp Bas light on your Jeep and address any underlying issues with the ESP/BAS system. However, if the light continues to come on or if you are unsure about performing these steps yourself, it is always recommended to consult a qualified mechanic for further assistance.

Safety should always be the top priority when dealing with vehicle-related issues.

Additional Tips And Troubleshooting

To reset the ESP BAS light on your car, you can try recalibrating the steering angle sensor. Simply turn the steering wheel twice to the right, twice to the left, and then bring it back to the center position. This DIY repair job can help resolve the issue and turn off the ESP BAS light.

If you’re still experiencing issues with your ESP BAS light after attempting a reset, here are some additional tips and troubleshooting steps to consider:

• Check the wiring: Wiring problems can often be the culprit behind an ESP BAS light coming on. Inspect the wiring that runs to the anti-lock brake system for any signs of damage or loose connections. If any issues are detected, it’s best to have a professional inspect and repair the wiring.
• Inspect brake components: Damaged brake components, such as worn-out brake pads, damaged rotors, or malfunctioning calipers, can trigger the ESP BAS light. Inspect these components to ensure they are in good condition. If any issues are found, it’s important to have them repaired or replaced to maintain the functionality of the ESP BAS system.
• Test wheel speed sensors: The wheel speed sensors play a crucial role in the operation of the ESP BAS system. A faulty wheel speed sensor can cause the ESP BAS light to come on. To diagnose a bad sensor, you can use a diagnostic tool or bring your vehicle to a professional who can perform a thorough inspection.
• Check steering angle sensor: The steering angle sensor is another component that can contribute to ESP BAS light issues. If the sensor is not calibrated correctly or is malfunctioning, it can trigger the light. In this case, it may be necessary to have the sensor recalibrated or replaced by a professional.
• Consult a professional: If you’ve tried the troubleshooting steps mentioned above and the ESP BAS light is still illuminated, it’s best to consult a professional mechanic or technician. They have the expertise and specialized equipment to diagnose and resolve more complex issues with the ESP BAS system.

Remember, addressing the root cause of the problem is essential to avoid any potential safety hazards associated with the ESP BAS system. By following these tips and utilizing professional assistance when needed, you’ll be able to troubleshoot and resolve ESP BAS light issues effectively.

Credit: www.obdadvisor.com

Frequently Asked Questions Of How To Reset Esp Bas Light

What Would Cause The Esp Bas Light To Come On?

The ESP BAS light can come on due to wiring problems, damaged brake components, or a bad wheel speed sensor. To reset the light, turn the steering wheel twice to the right, then twice to the left.

How Do You Reset The Esp On A Jeep?

To reset the ESP on a Jeep, turn the steering wheel twice to the right, then twice to the left, and back to the center position.

How Do You Fix The Esp Bas Light On A Jeep Grand Cherokee?

To fix the ESP BAS light on a Jeep Grand Cherokee, you can reset the steering angle sensor by turning the steering wheel twice to the right, then twice to the left, and back to the center position. This should recalibrate the sensor and turn off the light.

How Much Does It Cost To Fix The Esp Bas Light?

The cost to fix the ESP BAS light varies depending on the specific issue. It is recommended to contact a professional for an accurate estimate.

Conclusion

To reset the ESP BAS light on your car, it is important to address the underlying causes of the issue. The light can come on for various reasons, such as wiring problems, damaged brake components, or a faulty wheel speed sensor.

One common solution is to recalibrate the steering angle sensor, which can be done as a do-it-yourself repair job. Simply turn your steering wheel twice to the right, then twice to the left, and finally, move it back to the center position to complete the reset.

This should help turn off the ESP BAS light. It is essential to ensure that all necessary repairs and maintenance are carried out to keep your vehicle in optimal condition and ensure your safety on the road. By following these steps and addressing the underlying causes, you can reset the ESP BAS light and have peace of mind while driving.