Audi Epc Light Car Shaking

Last Updated on June 19, 2023 by Ryan

The Audi EPC light indicates a problem with the Electronic Power Control system. When this light is illuminated, it usually means that the vehicle’s engine has misfired or is running at an irregular speed. Car shaking can be caused by a variety of issues related to the EPC system including fuel delivery problems, spark plug issues, low compression in one or more cylinders, and vacuum leaks.

If you notice your car shaking along with the illumination of your EPC light then you should take it to a qualified mechanic as soon as possible for diagnosis and repair.

Audi EPC Light car shaking is a common issue that many Audi drivers experience. It’s caused by faulty electronic components in the engine, which can lead to misfires and cause the vehicle to shake when starting or accelerating. Fortunately, it can be addressed fairly easily with the help of an experienced mechanic who can diagnose and repair the problem quickly so you don’t have any more issues down the road.

Audi/Volkswagen EPC Light On At Low 1500 Rpm! Engine Shakes & Rough Idle. Case Study Fixed Problem.

Epc Light And Engine Light on Audi

The EPC Light and Engine Light on an Audi are two distinct warning lights that indicate different issues with the vehicle. The EPC light is a yellow triangle with an exclamation point in it, and it indicates that there is a problem with the Electronic Power Control system (EPC). This could be due to something as simple as a loose fuel cap or more serious issues like engine misfiring.

The Engine Light is also known as the Check Engine light, and when illuminated, it signifies a possible malfunction within one of the car’s major components such as oxygen sensors, spark plugs or catalytic converters. It’s important to have any problems indicated by either of these lights diagnosed by a certified technician before continuing to drive your Audi.

Audi Epc Light And Misfire

The Audi EPC light and misfire is a common issue that can occur in many Audi models. It is typically caused by a faulty spark plug, coil packs or vacuum leak in the engine. The EPC light will illuminate on the dashboard when this problem occurs and it indicates that there is an issue with the engine control system.

If you suspect your vehicle has this issue, it’s important to have it checked out by a qualified technician as soon as possible so they can diagnose and repair the problem before further damage is done to your car’s engine.

Audi Epc Light Reset

Resetting the Audi EPC light can be done quickly and easily with a few simple steps. First, turn off your car’s ignition and wait for at least 15 minutes before turning it back on. Next, open your hood and locate the fuse box that is located near the battery.

Once you have located the fuse box, remove all of its fuses one by one until you find the EPC light fuse. Finally, replace this fuse after waiting an additional 10 to 15 minutes before restarting your vehicle. Following these steps will reset any faults stored in the car’s system related to this issue and should restore normal operation of your vehicle’s electrical system.

How to Fix Epc Light on Audi A4

If your Audi A4 is displaying the EPC light on its dashboard, there are several steps you can take to try and fix it. First, make sure that your car has enough oil and coolant levels by checking them with a dipstick or measuring cup. If these levels are low, top them off and see if the EPC light disappears.

Next, check all of your vehicle’s electrical connections for corrosion or loose wires; this could potentially be causing an issue with the engine control unit (ECU). Finally, if the problem persists after inspecting these components, it may be necessary to reset the ECU by disconnecting the battery for at least 15 minutes before reconnecting it again. By following these steps carefully you should be able to resolve any issues related to your Audi A4’s EPC light quickly and easily!

Audi Epc Light Car Shaking


Why is My Audi Engine Shaking?

If your Audi engine is shaking, it could be caused by a variety of issues. Some common causes for engine shaking include misfiring spark plugs, an unevenly-balanced flywheel or crankshaft, worn out motor mounts, a faulty mass air flow sensor, or low compression in the cylinders. In some cases, the problem can be solved with simple maintenance such as replacing spark plugs or changing oil.

However, if the issue persists after these steps have been taken it might be necessary to bring your car into a certified mechanic who can diagnose and repair any deeper problems that may exist.

What Does It Mean When Your Engine Light is on And Your Car is Shaking?

When your engine light is on and your car is shaking, it could indicate a variety of problems. The most common cause for this issue is an ignition problem such as a misfiring spark plug or faulty fuel injector. It can also be caused by worn out motor mounts or another mechanical issue that affects the smooth running of the engine.

Additionally, low oil levels, clogged air filters or other issues with the exhaust system may also cause these symptoms. If you notice your engine light on and your car shaking, it’s important to get it checked out immediately by a qualified mechanic in order to prevent more serious damage from occurring.

Is It Safe to Drive With Epc Light on Audi?

It is not safe to drive with the Electronic Power Control (EPC) light on in an Audi. When this warning light comes on, it indicates a problem with either the engine or transmission control system that could potentially cause a loss of power while driving and lead to an unexpected breakdown. If you notice this warning light illuminate, it’s important to get your car checked out by a qualified Audi mechanic as soon as possible.

The EPC can be triggered from any number of faults within the vehicle’s electronic systems and may require specific diagnostic equipment for proper diagnosis and repair. Ignoring the issue could possibly put you at risk of being stranded on the side of the road, so having it addressed immediately is very important.

What Does It Mean When the Epc Light Comes on in a Audi?

When the Electronic Power Control (EPC) light illuminates in your Audi, it indicates a fault with the vehicle’s drivetrain or engine. This can be caused by a variety of things such as low fluid levels, faulty sensors and actuators, or wiring issues. The EPC light is usually accompanied by an error code that will help you pinpoint what specifically needs to be addressed for repair.

It is important to have any issue indicated by the EPC light diagnosed immediately because if left unchecked it could lead to more serious damage and costly repairs down the line.


Overall, the causes of an Audi EPC light and car shaking can be difficult to diagnose and may require professional assistance. However, if you are able to identify the underlying issue yourself, it can save you time and money in the long run. It is important to ensure that all components of your vehicle are regularly serviced in order to avoid any potential problems with your car.

Furthermore, seeking out professional help when needed is essential for keeping your vehicle running smoothly and safely on the road.


Leave a Comment