How to Fix Eps Light Hyundai Elantra

Last Updated on February 8, 2023 by Ryan

If your Hyundai Elantra’s EPS light is on, it means there is a problem with the electronic power steering system. You will need to take it to a mechanic to have it diagnosed and repaired.

• Park your Hyundai Elantra in a safe location and turn off the engine
• Lift the hood and locate the EPS (Electronic Power Steering) fuse in the fuse box
• The fuse box is usually located near the battery
• Check the EPS fuse to see if it is blown
• If the fuse is blown, replace it with a new one of the same amperage rating
• Start the engine and check to see if the EPS light is still illuminated on the dash panel
• If so, there may be another problem with your power steering system and you should have it checked by a certified Hyundai technician as soon as possible

Hyundai I10 EPS Light Problem Solved – Electronic Power Steering Hard (Diagnosed and Fixed)

2013 Hyundai Elantra Eps Light Reset

When you see the EPS light come on in your 2013 Hyundai Elantra, it’s time to reset the system. This can be done by following these simple steps: 1. Turn off the engine and remove the key from the ignition.

2. Press and hold the trip button located on the instrument cluster for at least five seconds. 3. Start the engine and verify that the EPS light is no longer illuminated.

How to Fix Eps on Hyundai Elantra 2010

If you’re like most people, you probably don’t think about your car’s EPS (electric power steering) until something goes wrong. And if you own a Hyundai Elantra from 2010 or later, you may have experienced EPS failure. Fortunately, there is a fix for this problem and it’s relatively easy to do yourself.

The first thing you’ll need to do is purchase the correct parts. You’ll need a new motor/pump assembly and a new steering rack. The good news is that these parts are readily available online and they’re not too expensive.

Once you have the parts, the next step is to remove the old EPS unit. This is actually pretty easy to do. Just disconnect the negative battery terminal, then remove the three bolts that hold the EPS unit in place.

With the unit removed, you can now install the new one in its place. Now, all that’s left to do is reconnect the negative battery terminal and enjoy your newly fixed Hyundai Elantra!

Eps Hyundai Elantra 2013

The 2013 Hyundai Elantra features a 1.8L engine that produces a maximum power of 148 horsepower and 131 lb-ft of torque. It has a six-speed automatic transmission with manual shift control. The car comes with standard front-wheel drive, but all-wheel drive is optional.

It has an EPA fuel economy rating of 28 mpg in the city and 38 mpg on the highway.

Eps Light Hyundai Elantra 2010

If you own a Hyundai Elantra from 2010 or newer, you may have noticed the EPS (Electronic Power Steering) light come on occasionally. This is nothing to be alarmed about and there are no immediate consequences. However, it’s important to understand what this light means and why it comes on.

The EPS system assists in steering by providing power assistance when needed. It does this by using sensors to detect driver input and then providing additional steering force when necessary. The system is entirely electronic and there are no hydraulic components.

The EPS light comes on when the system detects a problem with itself or with one of the inputs it uses to provide steering assistance. For example, if a sensor is malfunctioning or not providing the correct input, the EPS system will detect this and trigger the EPS light. In most cases, the only symptom you’ll notice is the EPS light coming on intermittently.

However, if the problem persists, you may notice reduced power assist while driving which can make steering more difficult. If your Hyundai Elantra’s EPS light comes on, don’t panic! It’s likely not a serious issue and can be resolved relatively easily.

First, check your owner’s manual to see if there are any troubleshooting steps you can take yourself such as resetting the system or checking for loose connections.

Credit: thehonestmechaniccolorado.com

How Do I Fix the Eps Problem in My Car?

If you’re having problems with your car’s EPS system, there are a few things you can do to try and fix the issue. First, check the fuse box for any blown fuses. If you find one, replace it and see if that solves the problem.

If not, the next step is to check the EPS motor itself. This can be done by removing the negative battery cable and testing the resistance of the motor with an ohmmeter. If the resistance is out of range, then the motor likely needs to be replaced.

Finally, if all else fails, you may need to take your car to a mechanic or dealership for further diagnosis and repair.

How Much Does It Cost to Fix Eps on Hyundai Elantra?

If your Hyundai Elantra is having electrical problems, it may be due to a faulty EPS (electric power steering) system. This can be a costly repair, as the EPS system is made up of many complex parts. The exact cost will depend on the severity of the problem and which parts need to be replaced.

However, you can expect to pay several hundred dollars for the repairs.

What Does the Eps Light on a Hyundai Elantra Mean?

If the EPS light is on in your Hyundai Elantra, it means that there is a problem with the electronic power steering system. This can be caused by a number of things, such as a faulty sensor or a problem with the power steering pump. If this light comes on, you should take your car to a mechanic to have it checked out.

What Do I Do If My Eps Light Comes On?

If your EPS light comes on, it means that there is a problem with your electronic power steering. This could be caused by a number of things, including a loose battery connection, low power steering fluid levels, or a faulty power steering sensor. If you see the EPS light come on while you’re driving, it’s important to not ignore it.

You may still be able to drive the car, but without power steering assistance, it will be much more difficult to steer. If possible, pull over to a safe location and turn off the engine. Then check your power steering fluid level and make sure the reservoir is full.

If it’s not, add more fluid until it reaches the full line. Next, check your battery connections to make sure they are tight and secure. If they are loose, tighten them up and see if that clears the EPS light.

If not, you’ll need to have your car towed to a nearby service center so they can diagnose and repair the problem.

Conclusion

If your Hyundai Elantra’s EPS light is on, there are a few things you can do to try and fix it. First, check the fuse box for a blown fuse. If the fuse is fine, then you may need to replace the EPS motor or sensor.

If neither of those fixes the problem, then you will need to take your car to a mechanic for further diagnosis.