What Does Use Transmitter Pocket to Start Mean

Last Updated on February 2, 2023 by Ryan

Use Transmitter Pocket to Start (UTPS) is a feature on some radios that allows the user to start the radio by simply placing it in the transmitter pocket. This can be handy if you forget to turn your radio off, or if you want to quickly turn it on and off without having to fiddle with buttons.

When you hear the phrase “use transmitter pocket to start,” it means using your car’s emergency broadcasting system to find out where you are. This can be useful if you’re lost, or if you need to know what the weather is like in your area. Here’s how to use your transmitter pocket to start:

1. Find your car’s emergency broadcasting system. This is usually located in the glove compartment, but it may also be under the seat or in the trunk. 2. Turn on the power switch for the emergency broadcast system.

3. Press and hold the “transmit” button on the system. 4. Wait for a response from a nearby station. You should hear a voice coming through the speaker, telling you the name of the station and its location.

How to start your vehicle when No remote detected message displays

What Does It Mean to Use Transmitter Pocket to Start Car?

If you’re like most people, you probably don’t think much about your car’s key fob. But did you know that there’s a hidden feature on many key fobs that can come in handy in a pinch? It’s called the transmitter pocket, and it can be used to start your car if your regular key won’t work.

Here’s how it works: The transmitter pocket is located inside the key fob, and it contains a small button battery. When you press the button, it sends a signal to the car’s starter system, which then starts the engine. So, if your regular key won’t work for some reason (perhaps the battery is dead), you can still start your car by using the transmitter pocket.

Just make sure that you have a fresh battery in your key fob before you try this!

Where is the Transmitter Pocket in a Gmc?

Assuming you are referring to the GMC Terrain, the transmitter pocket is located on the driver’s side, just below the armrest.

Where is the Transmitter Pocket in a Chevy Trax?

Assuming you are referring to the OnStar system: The transmitter pocket is located on the underside of the center console.

Where is the Transmitter Pocket on a Chevy Sonic?

The transmitter pocket on a Chevy Sonic is located on the driver’s side of the vehicle, just below the headlight. It is a small, rectangular opening that allows access to the wires and components of the car’s electrical system. The pocket is typically used to store the car’s remote control, though it can also be used to hold other small items.

What Does Use Transmitter Pocket to Start Mean

Credit: checkengine.com

Use Transmitter Pocket to Start Equinox

If you’ve been thinking about getting into the world of amateur radio, now is a great time to start! And one of the best ways to get started is with the Transmitter Pocket for Equinox. The Transmitter Pocket for Equinox is a great little device that can help you get on the air quickly and easily.

It’s small and lightweight, making it easy to take with you wherever you go. But don’t let its size fool you – this pocket-sized powerhouse can pack a punch! With the Transmitter Pocket, you’ll be able to transmit on any of the HF amateur radio bands.

That means you can make contacts all over the world, whether you’re at home or on vacation. You can even use it in emergencies to communicate with other hams if traditional methods are unavailable. The Transmitter Pocket is simple to use, too.

Just connect it to your Equinox transceiver and start talking! There’s no need for complex setup or programming. And when you’re done using it, just disconnect and pocket it until your next QSO.

If you’re ready to get on the airwaves, pick up a Transmitter Pocket for Equinox today!

Chevy Use Transmitter Pocket to Start

We all know how important our keys are to us. They not only give us access to our car, but also provide a way to start the engine. Chevy has come up with a new way to start your car that doesn’t require any key at all.

The Chevy Use Transmitter Pocket uses RFID technology to start your car. All you have to do is place the fob in your pocket and the car will automatically start when you press the button on the dash. This new system is not only more convenient, but it’s also more secure.

With a traditional key, anyone who finds it can easily get into your car and drive off. With the Chevy Use Transmitter Pocket, only someone with the fob can start the engine. This means that if your fob is lost or stolen, no one will be able to use it to steal your car.

If you’re looking for a new and improved way to start your Chevy, look no further than the Use Transmitter Pocket system. It’s more convenient and more secure than a traditional key, making it the perfect option for those who want peace of mind when starting their car.

What is a Transmitter Pocket on a Cadillac

If you’re the owner of a Cadillac, or any other vehicle with an automatic transmission, you may be wondering what a transmitter pocket is. This small feature is actually a very important part of your car’s transmission system. The transmitter pocket is located on the side of the transmission case, near the top.

It houses the electronic control unit (ECU) for the transmission. This unit controls all aspects of the transmission, including shifting gears and regulating fluid levels. Without it, your car’s transmission would not be able to function properly.

So, if you ever have any questions about your Cadillac’s transmitter pocket, or any other aspect of its transmissions system, don’t hesitate to ask your mechanic. They should be able to give you all the information you need to keep your car running smoothly.


If you’ve ever wondered what the “Use Transmitter Pocket to Start” setting on your transmitter is for, this post is for you! This setting is actually a safety feature that prevents accidental engine start-up. If your transmitter is turned on and in the “start” position, the engine will not start until the switch is moved to the “run” position.

This is a great safety feature if you have young children or pets that might accidentally turn on your transmitter.


Leave a Comment