Last Updated on January 30, 2023 by Ryan
If you have a Dodge Journey that won’t start, the brake pedal may be hard to depress. This is caused by a faulty brake light switch. The switch is located on the brake pedal itself and is responsible for turning on the brake lights when the pedal is depressed.
If the switch is faulty, it can prevent the brakes from working properly. To fix this problem, you will need to replace the switch with a new one.
There’s nothing worse than getting into your car, ready to go, only to find that it won’t start. If your Dodge Journey is giving you this frustrating issue, don’t despair – there are a few things you can check before taking it in to the mechanic.
One possible reason your Journey won’t start is because the brake pedal is too hard.
This can be easily fixed by adjusting the brake pedal height. To do this, simply loosen the lock nut under the dash and turn the adjuster until the pedal feels soft when you press it.
Another possibility is that there is something wrong with the battery or starter.
If you suspect this may be the case, try jump starting your Journey from another car. If it starts right up, then you know it’s an issue with either of those components and not with the engine itself.
If neither of these solutions work, then it’s time to take your Journey in to a mechanic for a diagnosis.
Don’t worry – chances are good that they’ll be able to figure out what’s wrong and get you back on the road in no time!
2015 Dodge Journey Won’t Start (Hard brake petal)
Why My Car Won’T Start And Brake is Hard?
If your car won’t start and the brake is hard, it’s likely that there is an issue with the battery. The first thing you should do is check the connections to make sure they are clean and tight. If they are, then you may need to replace the battery.
If the brake is hard, it could be due to a leak in the hydraulic system or a problem with the calipers.
What Would Cause a Dodge Journey to Not Start?
If your Dodge Journey won’t start, there are a few potential causes. One possibility is that the battery is dead. If you turn the key and nothing happens, or if the engine cranks slowly, this could be the problem.
Another possibility is that the starter itself is faulty. This can happen if the starter solenoid goes bad or if the starter motor wears out. If you’re not sure what’s causing your Journey to not start, it’s best to take it to a mechanic for diagnosis.
Why is Brake Pedal Locked?
If your brake pedal is locked, it could be because of a problem with the caliper, the brake line, or the master cylinder. If the caliper is seized, it may not be able to release properly and will cause the brake pedal to feel hard and locked. The brake line may be clogged or leaking, which can also lead to a locked brake pedal.
Lastly, if the master cylinder is failing, it can cause pressure to build up in the system and lock the brakes.
If you’re experiencing a locked brake pedal, it’s important to have it checked out by a professional as soon as possible. Depending on the cause, it can be a serious safety issue.
What Should You Do If the Brake Pedal Becomes Hard to Press?
If the brake pedal becomes hard to press, there are a few things you can do. First, check the fluid level in the brake reservoir. If it’s low, add more fluid and check for leaks.
Next, check the brake pads and rotors. If they’re worn out, they’ll need to be replaced. Finally, check the brake lines for any leaks or damage.
Credit: www.rac.co.uk
Dodge Journey Anti Theft Reset Push Button Start
Most new cars nowadays come with some form of anti-theft protection, but the Dodge Journey is one of the few that comes with a reset push button start. This means that if your car is stolen, the thieves will need to know the code to restart it. Here’s how to reset your Journey’s anti-theft system:
1. First, find the emergency override slot on the driver’s side door panel. It should be located near the bottom of the panel, and will have a small hole in it.
2. Insert a small object (like a paperclip) into this hole and press firmly for about three seconds.
You should hear a clicking sound as you do this.
3. After you’ve done this, turn off all the lights and accessories in your Journey, then close and lock all the doors.
4. Finally, use your key fob to unlock the doors, then start the engine as usual.
Your anti-theft system should now be reset!
Dodge Journey Won’T Start Just Clicks
If your Dodge Journey won’t start, there are a few things you can check. First, make sure the battery is charged and that the connections are clean and tight. If the battery is good, then it’s likely an issue with the starter or ignition system.
Check to see if the starter engages when you turn the key. If it doesn’t, then it may need to be replaced. If the starter does engage, then the problem is likely with the ignition system.
Check all of the connections and fuses to make sure they’re all intact. If everything looks good there, then it’s possible that the ignition switch itself is faulty. Replacing the switch should fix the problem.
My Brake Pedal is Stiff And Car Won’T Start
If your brake pedal is stiff and your car won’t start, there are a few things that could be happening. It’s important to diagnose the problem so that you can fix it and get back on the road.
One possibility is that there is an issue with your brake booster.
If the booster isn’t working properly, it can make the pedal feel stiffer than usual. Another possibility is that there is air in your brake lines. This can happen if you’ve recently had work done on your brakes or if there is a leak in the system.
Either way, it’s important to get the problem fixed so that your car will stop safely.
Another possibility is that your starter motor is failing. If this is the case, you’ll likely notice other symptoms as well such as clicking when you turn the key or dimming headlights.
In this case, it’s best to have a mechanic take a look at your car to see what needs to be done to fix it.
No matter what the cause of your stiff brake pedal and non-starting car, it’s important to get it fixed as soon as possible. Not being able to start your car can be frustrating, but more importantly, it could be dangerous if you’re stuck somewhere and need to call for help.
Conclusion
If you’re having trouble starting your Dodge Journey, it might be because the brake pedal is too hard. There are a few things you can do to fix this problem. First, check the brake fluid level and make sure it’s full.
If it’s not, add some more until it is. Next, check the brake pads and make sure they’re not worn out. If they are, replace them with new ones.
Finally, check the brake rotors and make sure they’re not damaged. If they are, have them replaced by a professional mechanic.
Author
-
by
-
